Section "Module"
    Load        "dbe"   # Double buffer extension
    Load "extmod"
  
    Load        "type1"
    Load        "freetype"
    Load       "glx"
#    Load       "dri"
EndSection


Section "DRI"
        Mode 0666
EndSection


Section "Files"
    RgbPath     "/usr/X11R6/lib/X11/rgb"
    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "/opt/fonts"
    ModulePath "/usr/X11R6/lib/modules"
EndSection
  

Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#    Option "NoTrapSignals"
    
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.
#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.
#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
#    Option "AllowNonLocalModInDev"
    
EndSection
  

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "Keyboard"
#    Option     "Protocol"      "Xqueue"
    Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"  "us"
    
EndSection


Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "imps/2"
    Option "ZAxisMapping" "4 5"
    Option "Device"      "/dev/mouse"
EndSection


Section "Monitor"

    Identifier  "HP4331D"
    HorizSync   30-82
#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies
    VertRefresh 48-150
    ++vsync
EndSection


Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver     "vga"
#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks     25.2 28.3
EndSection


Section "Device"
    Identifier  "G200"
    Driver      "mga"
    BusID       "PCI:4:0:0"
    #VideoRam    8192
    VideoRam 8192
#    Option     "SWCursor"
#    Option      "ShadowFB"
#    Option      "PciRetry"
    # Insert Clocks lines here if appropriate
EndSection

Section "Device"
    Identifier  "permedia2"
    Driver      "glint"
    BusID       "PCI:1:8:0"
    #VideoRam    4096
    #VideoRam 4096
    # Insert Clocks lines here if appropriate
EndSection

Section "Device"
    Identifier  "rage"
    Driver      "r128"
    BusID       "PCI:01:08:00"
EndSection
    
    
# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier  "Screen 1"
    Device      "rage"
    Monitor     "HP4331D"
    DefaultDepth 16

    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
#        Modes       "800x600" "1024x768" "1280x1024"
        Modes        "1024x768" "1280x1024" "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
#        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    
EndSection
    
Section "Screen"
    Identifier  "Screen 2"
    Device      "G200"
    Monitor     "HP4331D"
    DefaultDepth 16

    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
#        Modes       "800x600" "1024x768" "1280x1024"
        Modes      "1280x1024"  "640x480" "800x600" "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
EndSection
    
    
# **********************************************************************
# ServerLayout sections.
# **********************************************************************


Section "ServerLayout"
    Identifier  "Simple Layout"
#   Screen "Screen 1"
    Screen "Screen 1" "" "" "" "Screen 2"
    Screen "Screen 2" "" "" "Screen 1" ""
#    Screen "Screen 2"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    
EndSection